AT163 Thermosetting Duct Tape
Water and salt water resistant - ideal for use in marine applications
Thermosetting adhesive - adhesive bakes onto applied surface above +110°C
Clean peel up to +110°C
Writable surface
Very good abrasion resistance
Gloss finish
Applications
Joint sealing on metal or plastic ducting
Sealing smooth and fibrous faced insulation materials
Umbilical cord wrapping for deep sea divers
Thickness
0.30mm
Breaking load
80 N/cm
Elongation
8%
Adhesion to steel
4.2 N/cm
Adhesion to self
3.0 N/cm
Service temp
-50°C to +110°C
