Polythene

In general, polythene tapes:

  • Will peel clean from most surfaces.
  • Have some degree of electrical insulation due to the nature of Polythene.
  • Are not Flame Retardant and will burn easily unless specially formulated
  • Conform to awkward surfaces very well
  • Are water resistant
  • Are halogen free
  • Use non-corrosive adhesives which make them unlikely to react with the surface they are in contact with.

AT30 Polyethylene Tape

  • Conforms to DEF STAN 75-1
  • Easy unwind
  • Good low temperature performance
  • Water resistant
Applications
  • Damp proof membrane joining
  • Joining and sealing polyethylene sheeting
Thickness 0.15mm
Breaking Load 16 N/cm
Elongation 300%
Adhesion To Steel 2.6 N/cm
Adhesion To Self 2.2 N/cm
Service Temp -40°C to +90°C